Properties

The MARISEAL® KATALYSATOR is mainly used when the MARISEAL® 250 or 260, needs to be overcoated within the same day of application or when the MARISEAL® 250 or 260, needs to be applied in higher coating thicknesses in one layer. The MARISEAL® KATALYSATOR accelerates the MARISEAL® 250/260 waterproofing coating for:

Applications

Waterproofing of Roofs
Waterproofing of Balconies, Terraces and Verandas
Waterproofing of Wet Areas (under-tile) in Bathrooms, Kitchens, Balconies, Auxiliary Rooms, etc
Waterproofing of Pedestrian and Vehicular traffic Decks
Waterproofing of Green Roofs, Flowerbeds, Planter Boxes
Protection of Polyurethane Foam Insulation
Waterproofing and protection of Concrete constructions like Bridge-Decks, Tunnels, Stadium Stands, Car Parks, etc.

Properties

The MARILATEX® is a Polymer latex (SBR). Improves the properties of mortars in several ways offering, e.g. increased bonding to substrate and flexibility, shrinkage reduction, higher resistance to chemical effects and abrasion, enhanced water impermeability etc. Ideal for creating the bonding layer between old and new concrete or mortar.

Applications

The MARILATEX® is used as a effective cement admixtute on:
Improvement of plaster
Improvement of cement screeds, etc.

Properties

The MARILATEX® PU is a modified Polyurethane latex (PUD). Improves the properties of mortars in several ways offering, e.g. increased bonding to substrate and flexibility, shrinkage reduction, higher resistance to chemical effects and abrasion, enhanced water impermeability etc. Ideal for creating the bonding layer between old and new concrete or mortar.

Applications

The MARILATEX® PU is used as a highly effective cement admixtute on:
Improvement of mortars
Improvement of plaster
Improvement of cement screeds, etc.

Properties

The MARISTICK 1000 is a solvent free, one component, low foaming polyurethane adhesive with high mechanical and chemical strength for use in exterior applications where constant humidity does not allow the use of other adhesives.

Applications

The MARISTICK® 1000 is used as a humidity stable adhesive on:
Wood
Mineral Wool
Extruded Polystyrene
Expanded Polystyrene
Metalse
Ceramic Tiles, etc.

Properties

The MARISTICK® 1070 is a low solvent, low viscosity, one component, low foaming polyurethane adhesive with high mechanical and chemical strength for use in exterior applications where constant humidity does not allow the use of other adhesives.

Applications

The MARISTICK® 1070 is used as a humidity stable adhesive on:
Wood
Mineral Wool
Metals
Ceramic Tiles, etc.

Properties

The MARISEAL® FABRIC is polyester, non-wooven Geotextile. It is used for reinforcing of the MARISEAL liquid-applied waterproofing membranes.

Applications

The MARISEAL® FABRIC is mainly used as a reinforcing fabric for use in combination with the MARISEAL®, liquid-applied waterproofing membranes. It is supplied in 20cm width and 1m width rolls of 100m length. Applied in combination with the MARISEAL® liquid-applied waterproofing membranes on: The entire surface to be waterproofed or applied locally on:
Wall-floor connections
Wall-wall connections
Around pipes outlets and chimney stacks
Lightdomes and air condition units
Waterspouts (siphon)
90° angles
Inside movement joints and over cracks, etc.

Properties

The MARISEAL® DECOFLAKES are colored flakes (chips) that is used for production of decorative waterproofing or decorative flooring applications.It is used by broadcasting in fresh layed coatings. Various Colors offered.

Applications

The MARISEAL® DECOFLAKES are used for:
Decorative waterproofing
Decorative flooring

Properties

The MARISEAL® DECOQUARTZ is a painted silica sand the is used for production of decorative waterproofing or decorative flooring applications.It is used either by broadcasting in fresh layed coatings or as a resin mortar applied by trowel to produce sandcarpets. Available in 0,7-1,2mm cornsize and 2,0-3,5mm cornsize. Read more about decorative sand waterproofing. Various Colors offered.

Applications

The MARISEAL® DECOQUARTZ is used for:
Decorative waterproofing
Decorative flooring

Properties

The MARISPORT 9100 is a one component, solvent free, polyurethane elastomeric binder. It provides excellent elasticity and high tear resistance properties with minimum shrinkage. It cures by reaction with humidity, even at very low temperatures.

The MARISPORT 9100 is a specialized elastomeric resin for binding of recylcled rubber or EPDM granulates for use in sports facilities, running tracks and casted objects.

Properties

The Marifelx Parquet Bond System is an integrated wooden floorboard application system with excellent performance.

Applications

Compatible with all types of wood
Suitable for industrial wood floor applications
Does not alter the effectiveness of in-floor heating systems
Allows maximum adhesion to the substrate
Suitable for home renovations without removing old floorboards
Sound proofing / reduces knock noise

Properties

The MARISOLV® 9000 is a special solvent for use with the MARISEAL® SYSTEM

Applications

Good compatibility with PU coatings.
Excellent solubility.
Suitable for use by hand application

Properties

The MARISOLV® 9010 is a special solvent for use with the MARISEAL® SYSTEM

Applications

Good compatibility with PU coatings.
Excellent solubility.
Suitable for use by hand application

Pokud máte jakékoli další otázky, kontaktujte nás.